LIME MILK TINT

Product description

Naturalcalk LIME MILK TINT IS A READY TO USE LIME BASED WALL PAINT FOR EXTERIOR AND INTERIOR. THE PAINT IS MADE OF LIME PUTTY LONGLY SEASONED ACCORDING TO UNI EN 459-1, NATURAL SOILS, INORGANIC OXIDES AND 100% NATURAL ADDITIVES, WHICH GIVE THE SUPPORT HIGH ADHESION.

Naturalcalk LIME MILK TINT it consists of a particular crystalline structure. STRUCTURE. THANKS TO THE HIGH BREATHABILITY OF THE PRODUCT, A WATER BALANCE IS OBTAINED IN THE MASONRY AS WELL AS AN OPTIMAL MICROCLIMATE OF THE ROOMS.

FINITURA-TINTA-AL-LATTE-DI-CALCE-NATURAL-CALK-BINCA

PRODUCT FEATURES AND BENEFITS

UNLIMITED DURATION AND EXPIRY, IF STORED CORRECTLY:

– IN ROOMS NOT IN DIRECT CONTACT WITH THE SUN

– WHEN OPENING THE PACKAGE, MAKE SURE THAT THE PRODUCT IS COVERED BY AN AMOUNT OF WATER SUCH AS TO PREVENT DIRECT CONTACT WITH THE AIR AND CLOSING THE LID OF THE BUCKET WELL

WHY SHOULD YOU CHOOSE Naturalcalk LIME MILK TINT?

PARTICULAR CRYSTALLINE RETICULAR STRUCTURE
OPTIMAL VISCOSITY INDEX
IT ALLOWS MAXIMUM BREATHABILITY AND IS A NATURAL ANTI-MOULD, 450 G/MQ-24H (DIN 53122 STANDARDS) Μ=140, SD = 0.05
RESISTS TO ALKALINE AGGRESSION
IT ANCHORS PERFECTLY IN THE SUBBASE (KG.30CMQ. TO TRACTION)
IT IS NOT FLAMMABLE
IT IS A REVERSIBLE PRODUCT
PH 13 ± 0,5

PRODUCT APPLICATION AND FIELDS OF USE

APPLY A COAT OF WHITE NATURALCALK LIME MILK TINT OR BASED ON THE COLOUR CHOSEN BY THE CUSTOMER, TO PROTECT THE PREFERABLY BY SPRAY NATURALCALK TILLICA , AFTER WAITING A FEW HOURS FOR IT TO DRY.

NATURALCALK LIME MILK TINT APPLIES TO THE INTERNAL OR EXTERNAL SURFACE OF NEW WALLS.

THE APPLICATION OF NATURALCALK LIME MILK TINT ON THE NEW WALL FINISH:

BY BRUSH, ROLLER OR SPRAY, GIVE THE FIRST COAT OF NATURALCALK Naturalcalk LIME MILK TINT, WAIT UNTIL THE FIRST COAT IS ALMOST DRY BEFORE APPLYING THE SECOND COAT, WHICH WILL BE CROSSED FOR A BETTER DISTRIBUTION OF THE PRODUCT.
ON THE INTERNAL OR EXTERNAL SURFACE OF OLD WALLS

IF THE SUPPORTS ARE IRREGULAR, THE PREPARATION OF THE BASE IS NECESSARY:

REMOVAL OF OLD PAINT OR SANDING TO REMOVE THE PARTS THAT FALL AWAY AND ALLOW THE SURFACE TO BREATHE.
CONSOLIDATION OF THE SURFACE WITH THE NATURALCALK ANTIBACTERIAL FIXATIVE. IN THE PRESENCE OF MOULD, USE THE NATURALCALK DISINFECTANT FIXATIVE.

IF NECESSARY, SMOOTH WITH NATURALCALK MALTA RASANTE TO MAKE THE BASE COAT HOMOGENEOUS, AND WAIT FOR IT TO DRY PERFECTLY AT LEAST 24 HOURS.

WARNINGS

Naturalcalk LIME MILK TINT SHALL NOT APPLY WITH TEMPERATURES OF THE ATMOSPHERE OR OF THE SUBSTRATE BELOW +5°C OR HIGHER THAN +30°C; BE CAREFUL TO USE IN EXCESSIVELY VENTILATED ENVIRONMENTS OR THOSE AT RISK OF QUICK DRYING, AND PROTECT FROM STRONG TEMPERATURE CHANGES. OUTDOOR PROTECT FROM RAIN FOR AT LEAST 48 HOURS.

FOR CLIMATE REASONS, ESPECIALLY ON HOT AND VENTILATED DAYS, AS THE TINT HAS NO CHEMICAL ADDITIVES, THE “DUSTING” PHENOMENON COULD OCCUR, THUS GIVING THE IMPRESSION OF A FAILURE TO ANCHOR THE COLOUR TO THE SUPPORT, WHICH WILL RUN OUT AS THE TINT BASED ON LIME WILL RIP (CARBONATION PHENOMENON).

THE EXCLUSIVE USE OF THE PRODUCTS OF THE NATURAL CALK LINE IS ABSOLUTELY STRICT IN EVERY PROCESSING PHASE OF THE TILLICA PASTA SYSTEM IN ORDER TO MAINTAIN THE CHARACTERISTICS OF THE SYSTEM AND TO GUARANTEE THE RESULT.

THE COMPANY TAKES ON SOLELY RESPONSIBILITY FOR THE PRODUCT UP TO THE DEPARTURE OF THE MATERIAL FROM THE DEPOSIT/SUPPLIER ARTE E MESTIERI SRL WHILE THE APPLICATION, USE AND PROCESSING ARE THE EXCLUSIVE RESPONSIBILITY OF THE CUSTOMER OR THE APPLICATOR.

THE COMPANY RESERVES TO MODIFY THE COMPOSITION KEEPING THE CHARACTERISTICS NATURALLY UNCHANGED.

Do you want to learn more? Download the detailed technical sheet

contacts